The Watcher device is an integrated and modular GSM system designed for telemetry, remote monitoring and central.
When connected to a logger with an alarm output module, as soon as a pre-set value is met, the AOM triggers a selectable output, thus a SMS message is sent through out the GSM network. Same thing happens when the situation goes back to normal.
The main module allows further expansion I/O.
The typical application include monitoring and control of Irrigation, Remote monitoring, water and waste management, energy management, pollution monitoring, weather monitoring, remote controllers alerting, etc.
Data Features for the Watcher
Þ Microprocessor Controlled
Þ Flexible power supply 7 – 20VDC
Þ Selectable analogue, digital and serial I/O:
Þ 8 digital inputs and 8 open-collector outputs 60mA/30V max
Þ Logical state given by LEDs
Þ Serial port for modem connection either GSM/GPRS/GPS
Þ I2C Bus for expansion ports
Þ Data programming stored in EEPROM
Þ RS485 port
Þ Easy connection or integration to a Weather Station (when AOM is integrated to a system)
Þ Easy programming using the Microsoft® Windows® HyperTerminal
Data Features for the GSM
Þ QuadriBand GSM 850/900/1800/1900MHz
Þ GPRS Multi-slot class 12
Þ Class 4 (2 W) for EGSM850
Þ Class 4 (2 W) for EGSM900
Þ Class 1 (1 W) for GSM1800
Þ Class 1 (1 W) for GSM1900
Þ AT Command Control
Þ TCP/IP via AT commands
Þ Internet Services: TCP, UDP, HTTP, FTP, SMTP, POP3
Þ Operating Temperature: -30°C to +70°C
Þ Storage Temperature: -40°C to +85°C
Þ Serial Port RS232 with IDC terminals and Connectors
Þ Quick fit SIM
Þ SMA female connector for antenna
Þ Power: 7 a 40V DC
Þ Consumption: 50uA (Power Down), 3mA (Standby), 300mA (GSM), 600mA (GPRS)
Þ Dimensions & Weight: 120x101x22mm, 100gr
Contact us for further informations through gestel@mail.telepac.pt